Raspberry Pi4 Official USB-C 15.3W power supply Black 5.1V 3A

Raspberry Pi4 Official USB-C 15.3W power supply Black 5.1V 3A

The official Raspberry Pi USB-C power supply is designed to power the latest Raspberry Pi 4 Model B computers, which were released in June 2019.
Featuring a captive USB-C cable, the power supply is available in four different models to suit different international power sockets,


Specifications

Output
 

• Output voltage: +5.1V DC
• Minimum load current: 0A
• Nominal load current: 3.0A
• Maximum power: 15.3W
• Load regulation: ±5%
• Line regulation: ±2%
• Ripple & noise: 120mVp-p
• Rise time: 100ms maximum to regulation limits for DC outputs
• Turn-on delay: 3000ms maximum at nominal input AC voltage and full load
• Protection: Short circuit protection, Overcurrent protection, Over temperature protection
• Efficiency: 81% minimum (output current from 100%,75%, 50%, 25%)72% minimum at 10% load
• Output cable: 1.5m 18AWG
• Output connector: USB Type-C

Input

• Voltage range: 100-240Vac (rated)
• 96-264Vac (operating)
• Frequency: 50/60Hz ±3Hz
• Current: 0.5A maximum
• Power consumption (no load): 0.075W maximum
• Inrush current: No damage shall occur and the input fuse shall not blow

Case material
UL94V-1

AC pin material
Brass (NI plated)

WARNINGS
• This product should be operated in a well-ventilated environment.
• The connection of incompatible devices to this power supply may affect compliance, result in damage to the unit and invalidate the warranty.

SAFETY INSTRUCTIONS
To avoid malfunction or damage to this product please observe the following:
• Do not expose to water or moisture, or place on a conductive surface whilst in operation.
• Do not expose to heat from any source; this is designed for reliable operation at normal ambient room temperatures.
• Do not attempt to open or remove the power supply case.

Write a review