Categories

Direct Sampling HF to 6M band (9Khz to 55Mhz) Sensitivity, 0.3uV, BRD dB 110, ADC clock frequency 125Mhz, ADC resolution, bit 14

Direct Sampling HF to 6M band  (9Khz to 55Mhz) Sensitivity, 0.3uV, BRD dB 110, ADC clock frequency 125Mhz, ADC resolution, bit 14
Direct Sampling HF to 6M band  (9Khz to 55Mhz) Sensitivity, 0.3uV, BRD dB 110, ADC clock frequency 125Mhz, ADC resolution, bit 14 Direct Sampling HF to 6M band  (9Khz to 55Mhz) Sensitivity, 0.3uV, BRD dB 110, ADC clock frequency 125Mhz, ADC resolution, bit 14 Direct Sampling HF to 6M band  (9Khz to 55Mhz) Sensitivity, 0.3uV, BRD dB 110, ADC clock frequency 125Mhz, ADC resolution, bit 14 Direct Sampling HF to 6M band  (9Khz to 55Mhz) Sensitivity, 0.3uV, BRD dB 110, ADC clock frequency 125Mhz, ADC resolution, bit 14
Brand: Giga
Product Code: COLIBRIDDCHF6M
Availability: 1
Price: R9,999.00
Ex Tax: R9,999.00
Qty:     - OR -   Add to Wish List
Add to Compare

Small-size ColibriDDC receiver is intended to receive the signals in HF frequency band 0.09 to 55 MHz, and also with the help of external filters to receive frequencies up to 800 MHz and work together with PC. It was designed in accordance with the principle of direct digital signal sampling by high-speed analog-digital converter. Such architecture allows to get rid of additional noise of analog cascades and makes the air sound natural and transparent. Local network interface allows to use the device remotely and also allows to connect simultaneously several receivers to one PC for solving various signal receipt tasks. ColibriDDC is a good low-cost receiver to review the technology of direct sampling which can be used in different spheres.

Note! The receiver doesn't contain band pass filters and can be overloaded by the strong signals from air.

Main capabilities 

  • ADC with sampling frequency 125 MHz and 14-bit resolution is used
  • Two independent receiving channels with sampling frequencies up to 312 kHz
  • Record air stations with the bandwidth to 312 kHz and the opportunity to reproduce it later
  • Opportunity to receive in Nyquist zones up to 800 MHz (necessary to set additional external filters)
  • Wide spectrum scope up to 62,5 MHz
  • 24 bit audio – DAC for decreasing signal delay
  • Connector for controlling external devices, 7 programmable transistor switches
  • Interface with PC – local network 100 Mbps
  • Low power consumption, 5V 0.64A
  • External reference generator input 10 MHz
  • Small dimensions W 64 x H 24 x L 112 mm
  • ExpertSDR2 receiver's software

Application field

  • Dual channel HF receiver
  • Panadapter  to classical transceivers
  • Remote reception point for contests and other applications
  • Spectrum analyzer with wide spectrum scope up to 60 MHz
  • Work with external digital signal decoders (digital type connection programs, CW skimmer, etc.)

PC requirements

  • Processor Intel Core2Duo and higher
  • Video card supporting the technology of OpenGL 1.5 and higher and RAM 256 Mbyte and more
  • Local network connector 100 Mbps or 1 Gbps
  • OS Windows 7-10 x32 or x64, OS Linux Ubuntu x64

Software

ExpertSDR2 program with adapted interface for the receiving mode is used together with the ColibriDDC receiver. At the present moment software works in the receiving mode and maintains two independent channels with the bands to 312 kHz. DSP library, developed by the company Expert Electronics, allowed to improve the receipt quality and to higher the software reliability. Two OS are supported: Windows 8 and Linux Ubuntu.

Receiver's block diagram.

 

  • REF – connector to connect external 10 MHz generator
  • PLL – ADC clock frequency synthesizer
  • ATT – attenuator
  • MCU – microcontroller unit
  • Ant – connector to connect the HF band antenna
  • TCXO – inbuilt temperature compensated crystal oscillator
  • ADC – high-speed analog-digital converter
  • DAC – audio digital-analog converter
  • EXT CTRL - connector for controlling the external devices
  • LPF – input low-frequency filter (disabling)
  • FPGA - field programmable gate array
  • LAN – local network connector
  • PHONES – jack for connecting headphones
  • Front – front panel
  • Rear – rear panel

 

Basic configuration: 

  • ColibriDDC Receiver
  • Power source 5V 2A
  • Adapter SMA - PL259 (UHF)
  • LAN – cable

BPF-KIT configuration: 

  • ColibriDDC Receiver
  • BPF-KIT
  • Power source 5V 2A
  • Adapter SMA - PL259 (UHF)
  • LAN – cable


Additional configuration:

In addition to basic receiver's configuration can be purchased the following devices:

  • PC's headset EE-PH-01
  • Control panel EE-EP-01 or Constructor EE-EP-02 for comfortable remote work

 

Technical specification

  • Modes* LSB/USB/DSB/CW/AM/SAM/NFM/WFM
  • Receiving bandwidth, MHz 0.01 - 55 (0.01-62.5)
  • Receiving bandwidth in all Nyquist zones, MHz 0.01– 800
  • Spectrum scope bandwidth (up to), MHz 62.5
  • Amount of independent receiving channels 2
  • Sensitivity, uV 0.3
  • Blocking Dynamic Range (BDR), dB 110
  • IMD3 Dynamic Range, dB 90
  • Image channel suppression, dB >110
  • Supply voltage range, V 4.5...5.5
  • Maximum consumption current, A 0.64
  • RF ADC clock frequency, MHz 125
  • RF ADC resolution, bit 14
  • Local oscillator stability, ppm +/- 0.5
  • Built-in attenuator, dB 0, -20
  • Built-in audio DAC resolution, bit 24
  • Dimensions W x H x L, mm 64x24x112
  • Weight, kg 0.3
 
* More modes can be supported via external software
Specifications are subject to change without notice or obligation and specifications are only guaranteed within the amateur radio bands.
 

Optional BPF-kit board with HF octave band filters:

160M: 1.73-2.6 MHz
80M: 2.6-4.3 MHz
60M: 4.3-6.5 MHz
40M: 6.5-7.9 MHz
30M: 7.9-13 MHz
20M: 13-15.9 MHz
17-15M: 15.9-21.0 MHz
12-10M: 21.0-30 MHz
ATT -20 dB
Preamp +10 dB

 

BPF-kit should be installed inside the receiver's case, with a set of simple manipulations.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Powered By OpenCart
Giga Technology © 2024