Si5351A Breakout Board with crystal reference oscillator (8 kHz to 160 MHz) 3 outputs

Si5351A Breakout Board with crystal reference oscillator (8 kHz to 160 MHz) 3 outputs
Si5351A Breakout Board with crystal reference oscillator (8 kHz to 160 MHz) 3 outputs
Brand: Giga
Product Code: LOSi5351ABBCRYSTAL
Availability: Out Of Stock
Price: R185.00
Ex Tax: R185.00
Qty:     - OR -   Add to Wish List
Add to Compare

Si5351A Breakout Board 8 kHz to 160 MHz.


A handy way to use the Si5351A clock generator IC in your RF and microcontroller projects.
The Silicon Labs Si5351A is a fantastic clock generator IC with some features that you won't see anywhere else. It can generate three independent output signals between 8 kHz and 160 MHz (there are some limitations, see Constraints below), using only a simple 25 MHz crystal reference oscillator. Each output can be independently tuned, switched on or off, and have a variable drive level selected. Using an Arduino and a library provided by us, you may control almost every parameter of the IC. The Si5351A is very useful in a variety of applications, such as wide-range VFOs (and can also simultaneously provide a BFO signal), handy signal source, beacon transmitter, or any other project where a stable and tuneable signal is needed.

The Etherkit Si5351A Breakout Board makes it convenient to use the Si5351A with your Arduino or other favorite microcontroller. While the Si5351A is a +3.3 V IC, our board provides a low-dropout voltage regulator and level conversion circuitry so that it can be used with either 3.3 V or 5 V controllers. The three outputs are brougt out to pads which accept SMA female end launch connectors (sold separately) and also to 0.1" headers. You may choose a standard 25 MHz crystal reference oscillator, or an optional high-stability 25 MHz TCXO reference oscillator.


  • All SMT components assembled, 0.1" headers included separately
  • Fully tested
  • Output frequency range: 8 kHz to 160 MHz (see Constraints below)
  • Number of outputs: 3
  • Output impedance: 50 Ω
  • Output drive levels: 2 mA, 4 mA, 6 mA, 8 mA (into 50 Ω)
  • Power supply: +3.3 V or +5 V
  • Interface: I2C (on a 0.1" header)
  • Output jacks: 0.1" header or optional SMA female end launch
  • PCB material: high quality 1.6 mm double-sided FR4 with soldermask and ENIG coating
  • PCB dimensions: 30 mm x 50 mm
  • RoHS Compliant

Two multisynths cannot share a PLL with when both outputs are < 1.024 MHz or >= 112.5 MHz. This means that you may only have two outputs under those conditions.


You will find all of the official documentation at the Etherkit Documentation Wiki.


Part list

Si5351A Breakout Board BOM
11 Apr 2016

| Part (marking)                  | Qty  | Ref                            | P/N
Capacitors (size 0805)
| 100n                              2      C2, C4
| 1u MLCC                           1      C1
| 4.7u MLCC                         1      C3                

| 0.1 inch jumper                   2                                       3M 969102-0000-DA                        
| 0.1 inch header - 3 pins          2      J2, J3
| 0.1 inch header - 5 pins          1      J1

| 25 MHz crystal                    1      X1                               ECS ECS-250-8-30B-CKM
| 25 MHz TCXO                       1      X1                               Abracon ASTX-H11-25.000MHZ-T
                                                                              (From 11 Apr 2016, from S/N 001126)
                                                                            Fox FOX924B-25.000
                                                                              (Until 10 Apr 2016, to S/N 001125)

| 2N7002                            2      Q1, Q2                           NXP 2N7002P,215

Resistors & Trimmers (0.125 W size 0805)
| 10k                               4      R1, R2, R3, R4     

| LP2985-3.3                        1      U1                               TI LP2985-33DBVR
| Si5351A-B                         1      U2                               SiLabs SI5351A-B-GT 

| PCB                               1

| SMA female end launch             3      J7, J8, J9


Sample code.

  1. Source code link
  2. Arduino Library
  3. Example code for Arduino

Note Colour may differ

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:

Powered By OpenCart
Giga Technology © 2024