UT-100B - Features (50~950MHz and 1200~1350 ) HAM TV
Please note you need an Radio Amateur License to order this product.
USB based modulator / demodulator with support for EN 300-744 DVB-T transmission and reception.
Powered from the USB bus, so no external power adapter is required
Full hardware modulation/demodulation, no host CPU computation required.
Modulator (Transmitter):
Direct digital conversion to 50~950MHz and 1200~1350 MHz for excellent signal quality
UT-100A/UT-100B/UT-100C support configurable bandwidth from 2MHz to 8 MHz.
(Note: UT-100D supports only receiving and does not support transmitting.)
Support only non-hierarchy mode
Programmable digital attenuator
Free Windows Stream Player
Free Windows and Linux SDK
Demodulator (Receiver):
UT-100A supports Worldwide Free to Air Digital Terrestrial (DVB-T) Receptions (5/ 6 / 7 / 8 MHz bandwidth)
UT-100B/UT-100D is a special custom version (supporting 2/3/4 MHz bandwidth) for amateur HAM TV reception.
(Note:UT-100C supports only transmitting and does not support receiving.)
Standard Windows DVB-T BDA driver provided
Windows Media Center compatible DVB-T TV tuner
UT-100 - Applications
DVB-T signal generator
Demonstrations
Research and development
Video Broadcast/Distribution
Digital Signage
Wireless Display
Hotel TV
Hospital TV
On-Board TV
Luxury Home Entertainment
Hotel Info TV
Trade Shows
Mall Info TV
Campus TV
In Stadium
Live Sports
Monitoring
Surveillance
Corporate TV
Industrial Monitoring
Amateur HAM TV
Host Requirements
· CPU: Intel, AMD, ARM, MIPS
128MB RAM of system memory or above
Higher CPU and memory required if DVB-T audio/video decoding is needed
· One available USB2.0 or 1.1 port
Note: USB 1.1 can only support 3~5 Mbps stream data rate.
Parameter |
Value |
||
RF connector |
Two 75-Ω MCX (female) connecters, one for Tx and one for Rx |
||
Bandwidth |
Transmitter |
UT-100A |
2/3/4/5/6/7/8 MHz |
UT-100B |
2/3/4/5/6/7/8 MHz |
||
UT-100C |
2/3/4/5/6/7/8 MHz |
||
UT-100D |
n/a |
||
Receiver |
UT-100A |
5/6/7/8MHz |
|
UT-100B |
2/3/4 MHz |
||
UT-100C |
n/a |
||
UT-100D |
2/3/4 MHz |
||
FFT |
2K, 8K |
||
Constellation |
64QAM/16QAM/QPSK |
||
Code rate |
1/2, 2/3, 3/4, 5/6, 7/8 |
||
Guard interval |
1/4, 1/8, 1/16 or 1/32 |
||
Frequency range |
Transmitter UT100A/B/C |
50~950MHz and 1200~1350MHz step size 1KHz |
|
Receiver UT100A/B/D |
50~950MHz, step size 1KHz |
||
RF Output Level |
0 dBm (108 dBuV) |
||
Digital Attenuator |
Range:+6/-25dB* , Step size 1dB |
||
MER |
50~950MHz, 35dB Typically 1200~1350MHz, 30dB Typically |
||
Spectrum Shoulder (Adjacent channel) |
45dB |
||
Phase noise |
<-92dBc @ 10kHz |
||
Carrier Suppression |
>42dB |
||
USB port |
USB 2.0 or USB 1.1 |
||
Power |
5V DC (USB Bus Power) 390mA (Tx and Rx) 170mA(Rx only) 340mA(Tx only) |
||
Dimensions (LxWxH) |
75x 30 x 15mm |
Note: There could be MER loss in high gain/attenuation level.
Package Content.