Categories

LILYGO TTGO T-Beam ESP32 433Mhz V1.1 WiFi Wireless bluetooth Module GPS NEO-6M SMA LORA32 18650 Battery Holder

LILYGO TTGO T-Beam ESP32 433Mhz V1.1 WiFi Wireless bluetooth Module GPS NEO-6M SMA LORA32 18650 Battery Holder
LILYGO TTGO T-Beam ESP32 433Mhz V1.1 WiFi Wireless bluetooth Module GPS NEO-6M SMA LORA32 18650 Battery Holder LILYGO TTGO T-Beam ESP32 433Mhz V1.1 WiFi Wireless bluetooth Module GPS NEO-6M SMA LORA32 18650 Battery Holder LILYGO TTGO T-Beam ESP32 433Mhz V1.1 WiFi Wireless bluetooth Module GPS NEO-6M SMA LORA32 18650 Battery Holder LILYGO TTGO T-Beam ESP32 433Mhz V1.1 WiFi Wireless bluetooth Module GPS NEO-6M SMA LORA32 18650 Battery Holder LILYGO TTGO T-Beam ESP32 433Mhz V1.1 WiFi Wireless bluetooth Module GPS NEO-6M SMA LORA32 18650 Battery Holder LILYGO TTGO T-Beam ESP32 433Mhz V1.1 WiFi Wireless bluetooth Module GPS NEO-6M SMA LORA32 18650 Battery Holder LILYGO TTGO T-Beam ESP32 433Mhz V1.1 WiFi Wireless bluetooth Module GPS NEO-6M SMA LORA32 18650 Battery Holder LILYGO TTGO T-Beam ESP32 433Mhz V1.1 WiFi Wireless bluetooth Module GPS NEO-6M SMA LORA32 18650 Battery Holder LILYGO TTGO T-Beam ESP32 433Mhz V1.1 WiFi Wireless bluetooth Module GPS NEO-6M SMA LORA32 18650 Battery Holder
Brand: Giga
Product Code: LILYGO433MHZLORAGPSWIFIBT
Availability: 9
Price: R296.00
Ex Tax: R296.00
Qty:     - OR -   Add to Wish List
Add to Compare

LILYGO TTGO T-Beam ESP32 433Mhz V1.1 WiFi Wireless bluetooth Module GPS NEO-6M SMA LORA32 18650 Battery Holder

 

Feature:

Working voltage 1.8~3.7V
Acceptable current 10~14mA
Transmit current 120mA@+20dBm
90mA@+17dBm
29mA@+13dBm
Operating frequency 433Mhz
Transmit power  +20dBm
Receive sensitivity  -139dBm@LoRa &62.5Khz&SF=12&146bps
 -136dBm@LoRa &125Khz&SF=12&293bps
 -118dBm@LoRa &125Khz&SF=6&9380bps
 -123dBm@FSK&5Khz&1.2Kbps
Frequency error  +/-15KHz
FIFO space 64Byte
Data rate 1.2K~300Kbps@FSK
0.018K~37.5Kbps@LoRa
Modulation Mode FSK, GFSK, MSK, GMSK, LoRa TM, OOK
Interface form SPI
Sleep current 0.2uA@SLEEP
1.5uA@IDLE
Operating temperature  -40℃ ~ +85℃
 
If you need additional OLED, you can buy it from us
 
Product Upgrade Content:
 
1. Pin GPIO34 pin is replaced with GPIO35
2. Replace the charging IC (TP5400) with the power management AXP192
3. GPS TX, RX pin replacement
4. Power on and remove, replace with button to open
5. Reduced sleep current
6. GPS battery replacement
 
OLED Description: (OLEF is not included)
 
1. Size: 0.96 inch
2. High resolution: 128 * 64
3. Color: white
4. Viewing angle: > 160 °
5. Driver IC: SSD1306
6. Working temperature: -30  celcius ~ 80  celcius
7. Module volume (generous): 27.0MM * 27.0MM * 4.1MM
8. Supports many control chip: Fully compatible with , 51 series, MSP430 series,STM32/2, etc. (a lot of routines for reference)
9. Wide voltage support: without any modification, directly supports 3.3V ~ 5V DC
10. Ultra-low power consumption: Normal operation Is 0.04W
11. IO port occupies minimal display: The IIC communication, as long as the two IO ports
 
ESP32 Features:
 
  • Lastest ESP32 Version: REV1
  • WIFI
  • bluetooth 
  • 4MB PSRAM
  • 4MB Flash
  • 3D Antenna
 
LORA Features:
  • Working voltage: 1.8~3.7v
  • Acceptable current: 10~14mA
  • Transmit current: 120mA@+20dBm,  90mA@+17dBm, 29mA@+13dBm
  • Operating frequency: 433/470MHz(433HMz version)
  • Transmit power: +20dBm
  • Receive sensitivity:
  • -139dBm@LoRa &62.5Khz&SF=12&146bps
  • -136dBm@LoRa &125Khz&SF=12&293bps
  • -118dBm@LoRa &125Khz&SF=6&9380bps
  • -123dBm@FSK&5Khz&1.2Kbps
  • Frequency error: +/-15KHz
  • FIFO space: 64Byte
  • Data rate: 1.2K~300Kbps@FSK, 0.018K~37.5Kbps@LoRa        
  • Modulation Mode: FSK,GFSK,MSK,GMSK,LoRa TMOOK
  • Interface form: SPI
  • Sleep current: 0.2uA@SLEEP, 1.5uA@IDLE
  • Operating temperature: -40℃- +85℃
  • Digital RSSI function
  • Automatic frequency correction
  • Automatic gain control 
  • Low voltage detection 
  • Fast wake-up and frequency hopping
  • Highly configurable data packet handler
  • Radio Semtech SX1276
 
GPS:
 
  • GPS modules NEO-6M, 3V-5V power supply Universal
  • Destined module with ceramic antenna, signal super
  • Save the configuration parameter data EEPROM Down
  • With data backup battery
  • There are LED signal indicator
  • Default Baud Rate: 9600
 
Power:
 
  • TP5400
  • 1A Battery Management
  • LED indicator: There are 4 LEDs show the battery status in real time.
  • USB: CP2104-GMR
  • Pre-Flash Firmware: -SoftRF V4.0
 
Package includes:
 
1 x TTGO T-Beam ESP32
1 x  Antenna
1 x  0.96 inch 128X64  OLED This module is not included but can be purchased separately.
2 x  Pin strips

Defult Software:

Default admin software installed is https://github.com/lyusupov/SoftRF

Connect to WIFI SoftRF-[Last 6 digits of Mac address]
PW: 12345678

GPS is lock if led at UPS block is flasing (nect to Antenna connector

Conect to admin screen http://192.168.1.1

Serial Port  ?? Board 38400

This Unit can be configured as a Lora APRS tracker using the folowing software.

https://github.com/antonjan/LoRa_APRS_Tracker

More information:

Default software installed is http://github.com/lyusupov/SoftRF

https://github.com/geeksville/Meshtastic-Android/blob/master/README.md 

https://github.com/meshtastic/Meshtastic-device/releases

https://github.com/Xinyuan-LilyGO/LilyGO-T-Beam 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Powered By OpenCart
Giga Technology © 2021