Author Topic: Where can I get plugins for SDR# (Sdrsharp) Recorders CTSS, DSD, Satellit tracke  (Read 10864 times)

Anton Janovsky (ZR6AIC)

  • Administrator
  • Jr. Member
  • *****
  • Karma: +0/-0
I fount this website with very nice plugins for your SDR# software
(you can use this script to install all the plugins)

Here is the list of plugins

1) Audio Processor
Displays range of audio signal contains 6 adjustable bandpass filters and customizable deemfazis filter.
2) IF Processor
Displays range IF signal to the demodulator, an asymmetric bandpass filter and a custom tracking notch filter.
3)Baseband Recorder
Writes the entire IQ stream received from the tuner to a file, you can choose a folder to store the recordings, and there is a scheduler for recording time. Large buffer for recording flow with high sampling rate without any losses. It can be controlled from other plug-ins.
4)IF Recorder
Writes a stream of IQ intermediate frequency to a file, you can choose a folder to store the recordings, and there is a scheduler for recording time. It can be controlled from other plug-ins.
5)Audio Recorder
Writes the audio file. Ample opportunities to control the format of the output file (mono, stereo, bit rate, sample rate). Extensive records management (do not write in the absence of a signal, create new files when changing frequency, etc.). Customizable file and folder names.
6)Decoder CTCSS squelch
It displays the CTCSS tone in the presence of the signal and provides the squelch responds to set the tone.
7) DCS Decoder Squelch
Displays DCS codes in the presence of a signal and contains a squelch responsive to certain code or the presence of any code in the signal.
Adds additional radio channels to SDR #. You can add more than one radio channel.
9) DSD Interface
The plug consists of three parts. The first - an additional audio output from the demodulator can be used to output the audio signal through a virtual audio cable to other programs (WXtoImage, DSD, etc.). The second - a graphical interface to configure and run a digital signal decoder DSDPlus. And the third - to automatically turn off the sound output SDR # when choosing a frequency with a digital signal.
10) Time Shift
It creates a memory buffer of up to several minutes. You can listen to the signals that have been broadcast and a present in the buffer. "All that is visible on the waterfall can be heard."
11) Digital Audio Processor
It contains audio bandpass filter squelch by the presence of an audio signal and a signal scrambler inversion spectrum
12) DDE Tracker + Scheduler
Plug-in to communicate with the satellite tracking programs (Orbitron, WXTrack, SatPC32). When / companion care in the reception area is executed a list of commands for the satellite specified in the scheduler. It can control other plug-ins and run external programs.
13) QPSK Demodulator
Plug-in for QPSK demodulation signal from the Russian satellite Meteor-M2 in real time. The final signal may be recorded in a file or transmitted via TCP on special version LRPTDecoder for decoding in real time. It may interact with other plug-ins.
14) TV
The plugin displays the received PAL / SECAM TV signal. For receivers with a bandwidth of more than 7 MHz at the same time you can listen to the sound via the main radio SDR #. For rtl-sdr receivers need the modified file rtl-sdr.dll.
15) Frequency Manager
Modified standard frequencies Manager SDR #. Added scanner iterates through the selected frequency. Added Manage window manager and some other improvements.
16) Frequency Scanner
Fast scanner. It scans the specified frequency range. Saves frequency are not in the manager and activity time at these frequencies. It can scan multiple bands with different grid spacing, modulation bandwidth of the signal. There are modes of scanning all frequencies in the range, or only frequencies which are in the frequency or vice versa manager only frequencies that are not in the manager.
17) MPX Output
It displays the selected audio device MPX signal after WFM demodulator with sample rate conversion to 192 kHz for further processing in other programs (eg RDSSpy).
18) Avia band 8.33 calculator
Corrects manual input frequency range of air according to the standard steps for 8.33 kHz.
19) IQ Correction
This is analogous to the standard functions of SDR # iq correction. For slower computers help save some CPU time. There is a separate mode for R820T tuners - removal of only a constant component correction IQ on these tuners are required.
20) Audio Waterfall
This plug-in created by Kiriyama. Adds SDR # waterfall displays the spectrum of the audio signal.
21) Frequency Lock
The function of this plugin is very simple, it blocks the frequency change settings in SDR #. Written at the request of the user to avoid accidental change of frequency of administration.

Here is a short description of the steps I took toinstall the plugins.
Firstely you need to install the sdrsharp software here is a link you can follow,34.0.html

When you have sdrsharp installed then follow the the plugin prosedure here.
0) Download this and copy the zipfile into the directory where hour sdrsharp.exe was installed.
1) Link where you can download the
2) Unzip the sdr-update,zip ffile in the directory where you have installed the sdrsahrp.exe
3) it should create a directory sdr-update in this directory if the unzip was sucsefull.
4) Go into the  sdr-update directory (cd sdr-update)
5)There should be 3 files in the sdr-update directory. (httpget.exe,setup.bat and unzip.exe) (dir)
6) Make shore you have internet connection.
7) Then run the setup.bat file
8) You willbe asked some questions to overide uand update alwayes say Y
9) The program will install all the plugins and will then stop.
10) Now just run sdrsharp.exe in this directory
11) The sdrsharp will start up and you will now see there is a adtional submenu on the left that said dsd if you scrole down on the left botom menu.
12) Then tune to DMR frequency  chanel 2 in your aria with sdrsharp at the top and swich on dsd on the left menu.

If all when ok you should be able to hear the decoded audio

Hope this help
Let me know if you get stuck.

here is the link again to the plugins
« Last Edit: June 01, 2015, 06:57:40 pm by Anton Janovsky (ZR6AIC) »