The ColibriNANO SDR ~110 dB BDR and up to 3 MHz sample rate. A 0.5 ppm local oscillator 0.01– 500Mhz 14-bit AD

The ColibriNANO SDR ~110 dB BDR and up to 3 MHz sample rate. A 0.5 ppm local oscillator 0.01– 500Mhz 14-bit AD

The ColibriNANO opens new horizons for HF band enthusiasts, thanks to its 14-bit ADC, which provides a ~110 dB BDR and up to 3 MHz sample rate. A 0.5 ppm local oscillator gives the ColibriNANO a great frequency stability. Using the ColibriNANO remotely, in some rural area will give you the lowest air noise you've ever seen while won't rob you from any comfort or functionality. The ColibriNANO operated by our own ExpertSDR2 software and compatible with popular HAM software such as HDSDR, SDRSharp via the ExtIO library.

 

Typical Applications 

• Direct connection with your laptop
• Remote operation
• Remote connection with a local transceiver
• Spectrum analyzer

 

ColibriNANO block diagram 

 

Supported platforms

• Windows
• Linux
• macOS
• WEB-client for HTML5 browser

 

Minimum hardware requirements

• Intel Core i3 CPU or equivalent
• 4GB of RAM
• High-speed USB 2.0 controller

 

Compatible HAM software

• ExpertSDR2
• Legacy SDRSharp
• HDSDR

 

Expert Electronics company developed the ExpertSDR2 software to control HAM radio equipment of its own design. Software version for the ColibriNANO allows you to harness all the potential of the receiver: remote operation, synchronization with the transceiver, IQ channel bandwidth up to 3 MHz, control of the preamplifier and LPF.

• Supported modes: LSB/USB/DSB/CW/AM/SAM/NFM/WFM
• IQ output via Virtual Audio Cable (VAC)
• Compatibility with any sound card installed on your PC for the audio output
• Synchronization with transceivers via CAT interface
• Special interface to control the CW Skimmer
• Minimum window resolution 860x466 pix
• Support of the FullHD and 4K monitors
• All new versions of the software are free

​

​

Appearance of the ExpertSDR2 software

• Modes* LSB/USB/DSB/CW/AM/SAM/NFM/WFM
• Receiving bandwidth, MHz 0.01 - 55
• Receiving bandwidth in the undersampling mode, MHz 0.01– 500
• Noise floor, dBm
  • 1.9 MHz (160M) - 131 dBm
  • 7.1 MHz (40M) - 130 dBm
  • 52.5 MHz (6M) - 127 dBm
• Sample rate with IQ stream resolution 24-bit, kHz 48, 96, 192, 384, 768
• Sample rate with IQ stream resolution 16-bit, kHz 1536, 1920, 2560, 3072
• Amount of software receivers 1 (+1 SubRX)
• Sensitivity, uV 0.35
• Blocking Dynamic Range (BDR), dB 110
• IMD3 Dynamic Range, dB 95
• Supply voltage range, V 4.5...5.5
• Maximum antenna input voltage, without ADC overload, mV (ATT=0 dB) 74 (Pk-Pk); 32.7 (RMS)
• Maximum current consumption, A 0.41
• Input impedance, Ohm 50
• ADC clock frequency, MHz 122.88
• ADC resolution, bit 14
• Local oscillator stability, ppm +/- 0.5
• Local attenuator with 0.5 dB step, dB from -31.5 up to +6
• RF input with up to 15 kV ESD protection SMA connector
• Dimensions L x W x H, mm (inches) 25х17х90 (3 1/2" x 1" x 5/8")
• Operating temperature, °C from -10 up to 60
• Active device temperature, °C +45...+50
• Weight, gram (ounces) 43 (1.52)

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: