Categories

ADALM PLUTO SDR transceiver Active Learning Module (Analog Devices) 325 MHz to 3.8 GHz (12Bit)

ADALM PLUTO SDR transceiver Active Learning Module (Analog Devices) 325 MHz to 3.8 GHz (12Bit)
ADALM PLUTO SDR transceiver Active Learning Module (Analog Devices) 325 MHz to 3.8 GHz (12Bit)
Brand: Giga
Product Code: ADALMPLUTOSDR
Availability: Out Of Stock
Price: R4,351.31
Ex Tax: R4,351.31
Qty:     - OR -   Add to Wish List
Add to Compare

ADALM PLUTO SDR transceiver​ Active Learning Module (Analog Devices) RF coverage from 325 MHz to 3.8 GHz 12-bit ADC and DAC
Analog Devices’ wireless communication tools with software defined radio (SDR), ARM® Cortex®-A9 for students, hobbyists, and educators

ADI’s ADALM-PLUTO is the ideal learning tool/module for radio frequency (RF), software defined radio (SDR), and wireless communications. Each ADALM-PLUTO is capable of full duplex transmit and receive capabilities and comes with two GSM antennas, covering 824-894 MHz and 1710-2170 MHz. Each unit comes with one 15 cm SMA cable for RF loopback, and is powered via USB. The self-contained RF learning module is supported by MATLAB and Simulink system objects; GNU Radio sink and source blocks, libiio, a library with C, C++, C#, and Python bindings.

The internal components of ADALM-PLUTO include AD936x RF Agile Transceiver™ and Analog Devices power solutions, Micron DDR3L and QSPI Flash, Xilinx® Zqynq® programmable SoC, and a USB 2.0 PHY. The firmware of the PlutoSDR is open source and comprises technology from Das U-Boot, the Linux Kernel, and Buildroot. The ADALM-PLUTO is the ideal learning tool for students, hobbyists, and educators wanting to explore wireless, SDR, and communications.

Features

  • Portable self-contained RF learning module
  • Cost-effective experimentation platform
  • Based on Analog Devices AD9363--Highly Integrated RF Agile Transceiver and Xilinx® Zynq Z-7010 FPGA
  • RF coverage from 325 MHz to 3.8 GHz
  • Up to 20 MHz of instantaneous bandwidth
  • Flexible rate, 12-bit ADC and DAC
  • One transmitter and one receiver, half or full duplex
  • MATLAB®, Simulink® support
  • GNU Radio sink and source blocks
  • libiio, a C, C++, C#, and Python API
  • USB 2.0 Powered Interface with Micro-USB 2.0 connector
  • High quality plastic enclosure

The PlutoSDR appears to be mainly advertised as a learning module for electrical engineering students (see the promotional PDF pamphlet here), but it there seems to be no reason why it could not be used as a general purpose SDR. In fact it seems that @csete the author of GQRX has already made his PlutoSDR work in GQRX

The PlutoSDR is also more than just an SDR. On board is a full SoC (‘System on Chip’) which includes an FPGA and ARM processor that allows Linux to run directly on the device. The processor and Linux can access the SDR and run applications on the device itself. Over on the PlutoSDR wiki there are already a few tutorials that show how to use the SDR with MATLAB, Simulink and GNU Radio.

Documents

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Powered By OpenCart
Giga Technology © 2024