Categories

Digital VHF UHF Power and SWR Meter RED-DOT 1050A 100 to 500Mhz 120W Max

Digital VHF UHF Power and SWR Meter RED-DOT 1050A 100 to 500Mhz 120W Max
Digital VHF UHF Power and SWR Meter RED-DOT 1050A 100 to 500Mhz 120W Max Digital VHF UHF Power and SWR Meter RED-DOT 1050A 100 to 500Mhz 120W Max Digital VHF UHF Power and SWR Meter RED-DOT 1050A 100 to 500Mhz 120W Max Digital VHF UHF Power and SWR Meter RED-DOT 1050A 100 to 500Mhz 120W Max Digital VHF UHF Power and SWR Meter RED-DOT 1050A 100 to 500Mhz 120W Max
Brand: Giga
Product Code: POWERSWR1050A150W
Availability: Out Of Stock
Price: R1,195.00
Ex Tax: R1,195.00
Qty:     - OR -   Add to Wish List
Add to Compare

Digital VHF UHF Power and SWR Meter RED-DOT 1050A 100 to 500Mhz 120W Max.

Connect the output of your transceiver to the "TX" and the Antenna or Load to the "ANT".

Please NOTE: This UV-Band meter utilize "N" type connectors. Proper adaptor / cable is required if your device has different type of connectors.

Operation

  • Press the red button to power on. After 2 seconds of LCD self test, it''s ready for normal measurement.
  • UV-Band meter will display in sequence:"+ XXX P" (pass through power),"- XXX P" (feed back power)," XXX Γ" (SWR value), 2 seconds display for each mode. Press the red button will hold the current display. Press it again to continue the display.
  • When using at night or weak illumination, just press and hold the red button for 1 second to turn the blue back light on. Press and hold the red button for 1 second again to turn it off.
  • 8 minutes after no power was measured, it will power off automatically. Press and hold the red button for 2 seconds to turn off manually.


Specifications:

  • Maximum Power 120 W
  • V.S.W.R 1.00~19.9
  • Frequency range (145mhz) / UHF(435mhz)
  • Standing Wave range coverd :100mhz~500mhz
  • Inserion Loss < 0.15dB(VHF) , < 0.25dB(UHF)
  • Temperature 0-70 degree C.
  • Battery 3 x AAA Type Battery or Rechargeable < 2mA (Backlight Off) Battery not included
  • Size 66 x 68 x 37 (mm)
  • Connectors N(SL16)
  • Weight < 260g

Battery installation:

Remove 4 black round screws on the corner of back cover and open it. Install 3 AAA batteries. BE CAUTIOUS to the polarities. Put the cover on and fasten the screws. IMPROPER INSTALLATION OF BACK COVER WILL CAUSE ERROR ON the UHF-BAND MEASUREMENT!
(Not include 3 x size AAA battery)


Package:
1x Digital VHF/UHF Power & SWR Meter (Battery not included)

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Powered By OpenCart
Giga Technology © 2024