UT-100B modulator / demodulator 50~950MHz,1200~1350 (Tx/Rx Full Duplex) HAMTV

UT-100B modulator / demodulator  50~950MHz,1200~1350 (Tx/Rx Full Duplex) HAMTV
UT-100B modulator / demodulator  50~950MHz,1200~1350 (Tx/Rx Full Duplex) HAMTV UT-100B modulator / demodulator  50~950MHz,1200~1350 (Tx/Rx Full Duplex) HAMTV
Brand: Giga
Product Code: UT100BRXTX501350
Availability: 2
Price: R3,840.00
Ex Tax: R3,840.00
Qty:     - OR -   Add to Wish List
Add to Compare

UT-100B - Features (50~950MHz and 1200~1350 ) HAM TV

Please note you need an Radio Amateur License to order this product.

 

 

 USB based modulator / demodulator with support for EN 300-744 DVB-T transmission and reception.

Powered from the USB bus, so no external power adapter is required
Full hardware modulation/demodulation, no host CPU computation required.
 
Modulator (Transmitter):
Direct digital conversion to 50~950MHz and 1200~1350 MHz for excellent signal quality
UT-100A/UT-100B/UT-100C support configurable bandwidth from 2MHz to 8 MHz.
(Note: UT-100D supports only receiving and does not support transmitting.)
Support only non-hierarchy mode
Programmable digital attenuator
Free Windows Stream Player
Free Windows and Linux SDK
 
Demodulator (Receiver):
UT-100A supports Worldwide Free to Air Digital Terrestrial (DVB-T) Receptions (5/ 6 / 7 / 8 MHz bandwidth)
UT-100B/UT-100D is a special custom version (supporting 2/3/4 MHz bandwidth) for amateur HAM TV reception.
(Note:UT-100C supports only transmitting and does not support receiving.)
Standard Windows DVB-T BDA driver provided
Windows Media Center compatible DVB-T TV tuner
 
UT-100 - Applications
DVB-T signal generator
Demonstrations
Research and development
Video Broadcast/Distribution
Digital Signage
Wireless Display
Hotel TV
Hospital TV
On-Board TV 
Luxury Home Entertainment
Hotel Info TV
Trade Shows
Mall Info TV
Campus TV 
In Stadium
Live Sports
Monitoring
Surveillance 
Corporate TV
Industrial Monitoring
Amateur HAM TV
 
Host Requirements
·      CPU: Intel, AMD, ARM, MIPS
128MB RAM of system memory or above
Higher CPU and memory required if DVB-T audio/video decoding is needed
·      One available USB2.0 or 1.1 port 
Note: USB 1.1 can only support 3~5 Mbps stream data rate.
 

Parameter

Value

RF connector

Two 75-Ω MCX (female) connecters, one for Tx and one for Rx

Bandwidth

Transmitter

UT-100A

2/3/4/5/6/7/8 MHz

UT-100B

2/3/4/5/6/7/8 MHz

UT-100C

2/3/4/5/6/7/8 MHz

UT-100D

n/a

Receiver

UT-100A

5/6/7/8MHz

UT-100B

2/3/4 MHz

UT-100C

n/a

UT-100D

2/3/4 MHz

FFT

2K, 8K

Constellation

64QAM/16QAM/QPSK

Code rate

1/2, 2/3, 3/4, 5/6, 7/8

Guard interval

1/4, 1/8, 1/16 or 1/32

Frequency range

Transmitter

UT100A/B/C

50~950MHz and 1200~1350MHz

step size 1KHz

Receiver

UT100A/B/D

50~950MHz,  step size 1KHz

RF Output Level

0 dBm (108 dBuV)

Digital Attenuator

Range:+6/-25dB* , Step size 1dB

MER

50~950MHz, 35dB Typically

1200~1350MHz, 30dB Typically

Spectrum Shoulder (Adjacent channel)

45dB

Phase noise

<-92dBc @ 10kHz

Carrier Suppression

>42dB

USB port

USB 2.0 or USB 1.1

Power

5V DC (USB Bus Power)

390mA (Tx and Rx)

170mA(Rx only)

340mA(Tx only)

Dimensions (LxWxH)

 75x 30 x 15mm

Note: There could be MER loss in high gain/attenuation level.

Package Content.

  • 1 x UT-100B usb dongle.
  • 1 x Antenna.
  • 1 x 20 db Attenuator.
  • 1 x USB extendar cable.
  • 1 x MCX to F pigtail assembly.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Powered By OpenCart
Giga Technology © 2020
The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email